IML label Flexo Printing Machine

Short Description:

Flexo Printing Machine for IML Label and Heat Transfer Films   Instruction: 1.Printing color:   6-10 colors (Arbitrarily increase or decrease ), for example: 8+0 7+1 6+2 5+3 4+4 2.Max. Mechanical Speed:   130m/min 3.Max. Printing Speed:         120m/min 4.Reticulated Rod:                 Ceramic Roller 8, closed scraper 8 sets 5.Accuracy of  Registration:   vertical ±0.25 mm( manual operation) 6.Broad wise:    ±0.15 mm(manual operation) 7.Max. Diameter of Roll Material:      Φ800 mm 8.Ai...


Product Detail

Product Tags

Flexo Printing Machine for IML Label and Heat Transfer Films

 

Instruction:

1.Printing color:   6-10 colors (Arbitrarily increase or decrease ), for example: 8+0 7+1 6+2 5+3 4+4

2.Max. Mechanical Speed:   130m/min

3.Max. Printing Speed:         120m/min

4.Reticulated Rod:                 Ceramic Roller 8, closed scraper 8 sets

5.Accuracy of  Registration:   vertical ±0.25 mm( manual operation)

6.Broad wise:    ±0.15 mm(manual operation)

7.Max. Diameter of Roll Material:      Φ800 mm

8.Air shaft:          φ76 mm(internal diameter)

9.Printing Pressure:  Mechanical adjustment

10.Embossing roller:  φ131.3 mm

11.Drying methods: electrical heating

12.Drying power:  36 KW

13.Fans :  45 W for 6 pcs,  750 W for 3 pcs,  370 W for 2 pcs

14.Main motor: 5.5 KW

15.Main inverter : TAIWAN DELTA

16.The ink motor:  Synchronous motor transport ink

17.Normal bearing:  Japan

18.Single bearing:   Japan

19.Aluminium wheel:  enable to oxidation and dynamic and static balance

20.E.P.C: full-automatic Servo control No carbon brush

21.Tension control system: magnetic powder for unwinding and rewinding  tension  control

22.Raise-drop version: the hydraulic raise-drop version

23.Electric: OMRON OR SCHNEIDER

24.Total power: 48 kw

25.Rang of printing length: 250 mm-900 mm

26.Plate thickness: 2.38 mm( both side adhesive included)

27.Max web width: 1000 mm

28.Printing width: 960 mm

29.Printing roller:one color one stick ,max printing length 300-400 mm

30.Substrates material: plastic, roll paper, non-woven fabric, IML Label and Heat Transfer Films.

 

Features

1. Easy operation, flexible starting, accurate color register.

2. Adopted motor, frequency control of motor speed, save electricity, Small fluctuation

3. When drop version ,automatically stop transported ink motor, it will automatically begin to Transport ink device when raise version

4. The way of transport the ink is through the rubber covered roller scraping

5. Adopted a special straight gear drive, Printing size is accuracy

6. It equipped with 3 set of devices, blowing and heating , and the heating adopted center constant temperature control system and group control

7. Low stick with steel processing, And after the special craft processing, and electroplate 3 wire thickness super hard chromium plating of protection

8. Aluminium wheel: enable to oxidation and dynamic and static balance

9. It has equipped with an box which cold air qualitative, it can  effectively prevent the ink adhesion defect after printing

10. The printed image is clear, Folding accuracy,high rate of finished products

11. Automatically counter , the machine stop when the material is cut off, automatically transported the ink when the machine stop, but the ink motor automatically stops when printing 

12. Overall dimensions:6×2.9×3.5m

13. Weight: 7000 KGS

 

 




  • Previous:
  • Next:

  • Write your message here and send it to us